50
AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
“Max” is selected, the equipment restricts the rate under specific limitation.
)
Rate(bps)
: Select a speed you want to allocate to the rule. Click on “Add” to add a rule.
)
Current QoS Table
: All QoS rules are listed here.
Note:
You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules
.
Routing
Before you apply routing function, you need to disable NAT first.
Figure 92: Advanced > Routing
)
Enable Static Routing
: Check the box to enable this function.
)
Destination LAN IP
: Specify the destination LAN IP address of static routing rule.
)
Subnet Mask
: Input the subnet mask of the corresponding IP address.
)
Default Gateway
: Input the default gateway of destination.
)
Hops
:
Specify the Max Hops number of static routing rule.
)
Interface:
Select the interface here.
)
Current Static Routing Table:
All static routing rules are listed here.
Figure 93: Current Static Routing Table
Note:
You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules
.
Tools
This page provides settings about password, time, DDNS, and firmware management. Please access by
clicking on the “Tools” on the left side.