Allied Telesis AT+TQm5403 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 58

Allied Telesis AT+TQm5403 Скачать руководство пользователя страница 33

AT-TQ5403 Series Wireless Access Point Installation Guide

33

Installation Guidelines

Review the following guidelines before installing the access point:

• The ceiling or wall mounting surface must be of proper material to

accommodate the screws and strong enough to support the weight

of the access point and cables. (Refer to Table 4 on page 47 for

the product weight.)

• Connect the Ethernet cable(s) and power cord to the access point

before installing the access point on the ceiling or wall. These are

physically difficult to install after the chassis is installed on the

mounting bracket.

• Ensure the Ethernet cable(s) is long enough to connect to its

destination point(s) before installing the access point. Once the

installation is complete, it is physically difficult to change the

cables.

• If the primary power for the access point is to be the external power

supply (not provided with the access point), ensure that an AC

power outlet is within six feet of the planned installation site. (Refer

to Table 6 on page 48 for the power supply AC power

specifications.)

• Refer to Figure 5 for the acceptable orientations for the table top, wall

and ceiling installations.

Figure 5. Orientations on a Tabletop, Wall and Ceiling Installation

Table Top

Ceiling

Wall

«
...
31
32
33
34
35
...
»

Содержание AT+TQm5403



























































Отзывы:

Нет отзывов