Allied Telesis AT-S82, Руководство пользователя

Страница: 25 / 72

AT-S82 Management Software User’s Guide
25
Returning the AT-S82 Management Software to the Factory Default
Values
This procedure returns all AT-S82 management software parameters to
their default values, including the IP address, which is reset to
192.168.1.1. To reset all the parameters except the IP address, follow the
procedure in “Resetting the Switch and Retaining the IP Address” on
page 24.
Caution
This procedure causes the switch to reboot. The switch does not
forward network traffic during the reboot process. Some network
traffic may be lost.
To return the AT-S82 management software to the default settings,
perform the following procedure:
1. From the main menu, select Reset System .
The Reset System page is shown in Figure 8.
Figure 8. Reset System Page
2. Click Apply .
The switch returns its operating parameters to the default values and
begins to reload the AT-S82 management software. This process
takes approximately one minute to complete. You cannot manage the
switch during the reboot. After the reboot is finished, you must start a
new web browser management session if you want to continue to
manage the switch.