Allied Telesis AT-RG613TX Series, Руководство пользователя

Страница: 17 / 28

AT-RG613/623TX Series Residential VoIP Gateway - User Manual 15
6. Installing the AT-RG613/623TX
Installation
Before installing the AT-RG613/623TX, please read the safety information “For
your Safety” in Chapter 1.
When deciding the location of the device, please observe the following instructions:
Do not install in direct sunlight, or a damp or dusty place.
Do not install on an inclined or unstable surface.
Do not cover air vents on the side or the back of the device.
Do not install near a TV, radio or mobile phone.
Do not place anything on top of the product.
Do not install this product outdoors.
Do not touch the connector terminals.
Wall Positioning
With the wall bracket in the package, you can hang the device on the wall. Before
proceeding you will need to insure that the position chosen makes it possible to:
a. Connect the UTP cables and AC power cable
b. View the LED indications on the top of the unit.
You will need the following items to complete the installation of the router:
•
Philips head screw driver
•
1 – 30 cm x 30cm (1 ft x 1 ft) square section of wall preferably covered
with 2 cm plywood (If wall mounting the router)
•
3 – 3mm x 2.5 cm (1/8in. x 1 inch) screws
•
3 – 3 drywall anchors if mounting on drywall
Provided in the installation kit:
•
1 – RG613TX or RG623TX
• 1 – Wall mount bracket