manualshive.com logo in svg

Allied Telesis AT-MWS1750AP, Руководство по установке, Страница: 22 / 58

Поделиться
Скачать
Allied Telesis AT-MWS1750AP Скачать руководство пользователя страница 22

Chapter 1: Product Description

22

LEDs

The LEDs on the top panel of the MWS series access point display status 
information.

LEDs for

AT-MWS600AP

and

AT-MWS1750AP

Models

The LEDs for theAT-MWS600AP and AT-MWS1750AP access points 
display status information as shown in Table 3.

Table 3. LEDs for theAT-MWS600AP and AT-MWS1750AP Access Points

LED State

Description

Power

Orange

The access power is powered ON and 
operating normally. 

Off

The access point is 

not

 receiving 

power.

LAN

Blue

A valid link is established on the port.

Blinking Blue

Data is being transmitted/received.

Off

No link is established.

2.4GHz Wi-Fi

Blue

The 2.4GHz Wi-Fi interface is enabled.

Blinking Blue

Data is being transmitted/received at 
the 2.4GHz frequency band.

Off

The 2.4GHz Wi-Fi interface is 

disabled.

5 GHz Wi-Fi

Green

The 5GHz Wi-Fi interface is enabled.

Blinking Green Data is being transmitted/received at 

the 5GHz frequency band.

Off

The 5GHz Wi-Fi interface is disabled.

Not supported.

Содержание AT-MWS1750AP



























































Отзывы:

Нет отзывов