Mounting Installation
DIN-Rail Mounting
14
AT-IMC1000TP/SFP Industrial Gigabit PoE+ Media Converter
3. Mounting Installation
3.1 DIN-Rail Mounting
The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed on the industrial
switch, please see the following figure to screw the DIN-Rail on the switch. Follow the below steps to hang the
industrial switch.
1. Use the screws to screw on the DIN-Rail clip on the industrial switch.
2. To remove the DIN-Rail clip, reverse step 1.
FIGURE 3-1 DIN-Rail Bracket Mounting Screw Location
3. First, insert the top of DIN-Rail bracket onto the top of the DIN-Rail track.
