background image

Translated Safety and Emission Information

26

Standards

: This product meets the following standards:

U.S. Federal Communications Commission

Declaration Of Conformity

Manufacturer Name:

Allied Telesyn, Inc.

Manufacturer Address:

960 Stewart Drive, Suite B 
Sunnyvale, CA 94085, USA

Manufacturer Telephone:

408-730-0950

Declares that the product:

Fast Ethernet Switches

Model Numbers:

AT-FS724L

This product complies with FCC Part 15B, Class B Limits:

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) This device must not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

Radiated Energy

Note: This equipment has been tested and found to comply with the limits 
for a Class B digital device pursuant to Part 15 of FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with instructions, may cause harmful interference to radio or 
television reception, which can be determined by turning the equipment 
off and on. The user is encouraged to try to correct the interference by one 
or more of the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and the receiver.

-

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

Changes and modifications not expressly approved by the manufacturer 
or registrant of this equipment can void your authority to operate this 
equipment under Federal Communications Commission rules.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian 
Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du 
Règlement sur le matériel brouilleur du Canada.

Содержание AT-FS724L















































Отзывы: