Installation Guide
13
PWR05
The following table describes LEDs on the PWR05 power supply unit.
FAN01
The following table describes LEDs on the FAN01 fan-only module.
FAN03
The following table describes LEDs on the FAN03 chassis fan module.
LED
State
Description
~
IN
Green
AC input voltage is within 90-264VAC, 47-63Hz.
Off
AC input voltage is outside the acceptable range.
OUT
Green
AC output voltage is within 12V +/- 10%.
Off
AC output voltage is outside the acceptable range.
FAULT
Red
A fault has occurred. There is either a fan failure, or the
temperature has exceeded its limit of 70º C (158º F).
Off
No fault conditions detected.
LED
State
Description
FAULT
Red
The fan has failed.
LED
State
Description
FAN
STATUS
Red
The fan has failed.
