Allied Telesis AT-DMC100/LC Скачать руководство пользователя страница 20

Страница: 20 / 64

Chapter 1: Overview

Twisted-Pair Port

Here are the basic features of the twisted-pair port:



1000Base-T compliant for AT-DMC1000/SC, AT-DMC1000/ST,

and AT-DMC1000/LC



100Base-TX compliant for AT-DMC100/SC, AT-DMC100/ST, and

DMC100/LC



IEEE 802.3u Auto-Negotiation compliant



Auto MDI/MDI-X



100 meters (328 feet) maximum operating distance



RJ45 connector

Note

For the port pinouts, see “RJ45 Connector and Port Pinouts” on

page 59. For cabling specifications, refer to “Planning the

Installation” on page 39.

Auto

MDI/MDI

An RJ45 twisted-pair port on a 100 Mbps Ethernet network device can

have one of two possible wiring configurations: MDI or MDI-X. The RJ45

port on a PC, router, or bridge is typically wired as MDI, while the

twisted-pair port on a switch or hub is usually MDI-X.

The media converter features Auto MDI/MDI-X. The twisted-pair port

automatically determines the configuration of the port on the device to

which it is connected and then configures itself appropriately.

For example, if a port on a media converter is connected to a port on a

bridge, which is typically wired as MDI, the port on the media converter

automatically configures itself as MDI-X.

This feature allows you to use a straight-through cable when connecting

any type of device to the media converter, regardless of the wiring

configuration of the port on the device.

Fiber-Optic Port

For maximum operating distance for the fiber-optic port, see “Fiber-Optic

Port Specifications” on page 61.

Power Source

The media converter is powered via a Micro-B USB connector and

provided Micro-USB to Type-A USB cable. The power source can be a PC

USB port or the optional external AC/DC power adapter.

Depending on the customer order, the AC/DC power adapter is included

with the media converter for standalone operation. The power adapter

supplies 5 VDC to the media converter. Allied Telesis supplies a UL

approved safety-compliant AC power adapter for the 120 and 240 VAC

versions with a regulated output of 5 VDC. The power required for the

media converter is 5 VDC, 0.5 A.

Содержание AT-DMC100/LC

































































Результаты поиска

Содержание AT-DMC100/LC

Отзывы:

Похожие инструкции для AT-DMC100/LC

Бренды по названию

Популярные бренды

Allied Telesis AT-DMC100/LC, Руководство по установке

Результаты поиска

Содержание AT-DMC100/LC

Отзывы:

Похожие инструкции для AT-DMC100/LC

Бренды по названию

Популярные бренды