Allied Telesis AT-AR2010V Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 64

Allied Telesis AT-AR2010V Скачать руководство пользователя страница 42

Chapter 2: Beginning the Installation

42

Unpacking the Router

Figure 20 lists the items that come with the AT-AR2010V router. If any
item is missing or damaged, contact your Allied Telesis sales
representative for assistance. You should retain the original packaging
material in the event you need to return the unit to Allied Telesis.

cord

Figure 20. Components of the AT-AR2010V router

Four rubber feet

One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin female)
connectors.

One double-side adhesive tape

One USB retainer

Two cable ties

One 3-Pin DC plug to go with the
DC input socket on the front panel

One addendum document sheet

REV Description

Drawn/Date Initials Checked/Date Initials

A

ECO C025999

Oct 2014

AD

Oct 2014

WG

AT NGFW Device insert

613-002048

613-002048_RevA

A

1 OF 1

PRODUCT

TITLE

DWG No

FILE NAME

SCALE

SHEET

SIZE

REV

UNITS

AT NGFW Device insert

1:1

A4

mm

See Installation Guide before connecting the power source.

Product Documentation

Allied Telesis is committed to providing the highest quality products while
minimizing the impact on the environment. As part of our green eco-friendly approach, you
now have access to the latest product documentation at
www.alliedtelesis.com/support.

For a device

WITH

Local Management Console Port: Connect a terminal

emulator using the management cable provided at either 9600 Baud or 115,200
Baud depending on your product - see your product Installation Guide.

For a device

WITHOUT

Local Management Console Port: Connect to one

of Ethernet ports and log on with a web browser at http://192.168.1.1/.

LOGIN: In either case, the default User Name is “manager” and default Password
is “friend”.

See Installation Guide before connecting the power source.

Product Documentation

Allied Telesis is committed to providing the highest quality products while
minimizing the impact on the environment. As part of our green eco-friendly approach, you
now have access to the latest product documentation at
www.alliedtelesis.com/support.

For a device

WITH

Local Management Console Port: Connect a terminal

emulator using the management cable provided at either 9600 Baud or 115,200
Baud depending on your product - see your product Installation Guide.

For a device

WITHOUT

Local Management Console Port: Connect to one

of Ethernet ports and log on with a web browser at http://192.168.1.1/.

LOGIN: In either case, the default User Name is “manager” and default Password
is “friend”.

See Installation Guide before connecting the power source.

Product Documentation

Allied Telesis is committed to providing the highest quality products while
minimizing the impact on the environment. As part of our green eco-friendly approach, you
now have access to the latest product documentation at
www.alliedtelesis.com/support.

For a device

WITH

Local Management Console Port: Connect a terminal

emulator using the management cable provided at either 9600 Baud or 115,200
Baud depending on your product - see your product Installation Guide.

For a device

WITHOUT

Local Management Console Port: Connect to one

of Ethernet ports and log on with a web browser at http://192.168.1.1/.

LOGIN: In either case, the default User Name is “manager” and default Password
is “friend”.

See Installation Guide before connecting the power source.

Product Documentation

Allied Telesis is committed to providing the highest quality products while
minimizing the impact on the environment. As part of our green eco-friendly approach, you
now have access to the latest product documentation at
www.alliedtelesis.com/support.

For a device

WITH

Local Management Console Port: Connect a terminal

emulator using the management cable provided at either 9600 Baud or 115,200
Baud depending on your product - see your product Installation Guide.

For a device

WITHOUT

Local Management Console Port: Connect to one

of Ethernet ports and log on with a web browser at http://192.168.1.1/.

LOGIN: In either case, the default User Name is “manager” and default Password
is “friend”.

One AC Adapter and power cord

«
...
40
41
42
43
44
...
»

Содержание AT-AR2010V

































































Отзывы:

Нет отзывов