manualshive.com logo in svg

Allied Telesis AT-9000/12PoE, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-9000/12PoE Скачать руководство пользователя страница 173

AT-9000 Switch Command Line User’s Guide

173

Setting the Speed and Duplex Mode

The twisted pair ports on the switch can operate at 10, 100, or 1000 Mbps, 
in either half-duplex or full-duplex mode. You may set the speeds and 
duplex modes yourself or, since the ports support Auto-Negotiation, you 
may let the switch configure the ports automatically. The default setting for 
the ports is Auto-Negotiation for both speed and duplex mode.

To set the speed manually on a port or to reactivate Auto-Negotiation, use 
the SPEED command in the Port Interface mode. The format of the 
command is:

speed auto|10|100|1000

The “10” setting is for 10Mbps, the “100” for 100Mbps and the “1000” for 
1000Mbps. The “auto” activates Auto-Negotiation for port speed.

The DUPLEX command, for setting the duplex mode, has this format:

duplex auto|half|full

The “half” setting is for half-duplex mode and “full” for full-duplex mode. 
The “auto” activates Auto-Negotiation for duplex mode.

You should review the following information before configuring the ports:

Auto-Negotiation may be activated separately for speed and 
duplex mode on a port. For instance, you may activate Auto-
Negotiation for speed on a port, but set the duplex mode manually.

The 1000 Mbps setting in the SPEED command is for fiber optic 
modules. The twisted pair ports on the switch must be set to Auto-
Negotiation to operate at 1000 Mbps.

Note

To avoid a duplex mode mismatch between switch ports and 
network devices, do not use duplex mode Auto-Negotiation on ports 
that are connected to network devices on which the duplex modes 
are set manually. Switch ports that are set to Auto-Negotiation 
default to half duplex mode if they detect that the network devices 
are not using Auto-Negotiation. This may result in duplex mode 
mismatches in which the switch ports use half duplex mode, and the 
network devices full duplex mode. To prevent this problem, always 
manually set the duplex mode on ports that are connected to 
network devices that are not using Auto-Negotiation.

Содержание AT-9000/12PoE











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды