Allied Telesis AT-2814FX, Инструкция по установке и эксплуатации, Страница: 65 / 86

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
65
Speed & Duplex
The Speed & Duplex property set both the link speed and the duplex mode
of the AT-2814FX ExpressCard.
To change the Speed & Duplex property, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select Speed & Duplex in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 34.
Figure 34. Speed & Duplex Page
5. Select one of the following options:

100 Mbps Full Duplex — 100 Mbps speed in the full duplex mode.
This is the default setting.