Allied Telesis AT-2712FX, Инструкция по установке и эксплуатации, Страница: 48 / 100

Chapter 4: Installing the Windows Vista and Windows 7 Driver Software
48
Installing the Driver Software
After you install a Secure Ethernet Network adapter, the system detects
the new hardware and creates an entry in the Device Manager when the
Windows operating system first boots up. Shortly after you log in, you
need to install the driver software for the Secure Ethernet Network
adapter. To install or update the driver software, you must have
administrative privileges.
To obtain the latest Secure Ethernet Network adapter software drivers, go
to the Allied Telesis website at
www.alliedtelesis.com/support/
software . For further instructions, see “Where to Find Management
Software Updates and Product Information” on page 13.
To install the Windows Vista or Windows 7 Operating System driver
software, do the following:
Note
The adapter must be physically installed in your system before you
install the driver software. See Chapter 2, “Installing the Hardware”
on page 21 for instructions.
1. Start a Windows operating system and log in.
2. Open the Device Manager.
For instructions on how to open the Device Manager, see one of the
following procedures:
– To open the Device Manager in the Windows 7
Operating System, follow steps 3 and 4.
– To open the Device Manager in the Windows Vista
Operating System, follow steps 5 through 7.