Allied Telesis AT-1500AT, Руководство по установке, Страница: 15 / 44

Configuring with CardAssistant
11
3. Insert the installation diskette into the appropriate floppy
drive.
4. Type:
<drive>
:setup15
where
<drive>
is the disk drive containing the
CardAssistant program. Proceed to step 6.
5. Install CardAssistant onto your hard disk by selecting the
Install command from the File menu. Once this is
accomplished, you can type:
path\ setup15
where
path\
is the optional drive and directory.
6. The main menu comes up and you are ready to select one of
the icons.
Running CardAssistant in 32-bit Windows Mode. If you are using
Windows 95 or Windows NT 3.5x, use this version of
CardAssistant.
1. If you are running CardAssistant from the installation
software diskette, follow steps 2 and 3. If CardAssistant is
installed on your hard disk, skip to step 4.
2. Insert the installation diskette into the appropriate floppy
drive.
3. Type:
<drive>
:ca
where
<drive>
is the disk drive containing the
CardAssistant program. Proceed to step 5.
4. Install CardAssistant onto your hard disk by selecting the
Install command from the File menu. Once this is
accomplished, you can type:
path\ ca
where
path\
is the optional drive and directory.
5. The main menu comes up and you are ready to select one of
the icons.
Working with CardAssistant Menus. You can use either the
keyboard or mouse to make menu selections, change settings,
and save or cancel your configuration changes.