Software Version 2.8.1
163
Software Version 2.8.1
C613-10477-00 REV B
show firewall
SHow FIREwall
Description
This command displays a summary of all security policies that have been
created and the interfaces assigned to each policy.
Figure 51: Example output from the
show firewall
command
show firewall policy
Syntax
SHow FIREwall POLIcy[
=policy-name
] [COUnter]
[RUle=
rule-id
[
-rule-id
]]
[SUMmary]
where
rule-id
is a number or range from 1 to 4294967295
Description
This new command displays detailed information about the specified policy or
all policies. The new
rule
parameter allows you to display only a specific rule,
or subset of rules, for each policy.
Firewall Configuration
Status .................... enabled
Enabled Notify Options .... all
Notify Port ............... 1
Notify Mail To ............ [email protected]
Maximum Packet Fragments .. 20
Sessions:
Maximum ................. 4000
Peak .................... 2589
Active .................. 400
.
.
.
Table 42: New parameters in output of the
show firewall
command
Parameter
Meaning
Sessions
Information about the firewall sessions.
Maximum
The maximum number of sessions that will be permitted
though the firewall.
Peak
Peak usage: the maximum number of active sessions that
have been opened at one time.
Active
The number of sessions currently in use.