Allied Telesis ANC10 Series, Инструкция по установке и эксплуатации

Страница: 89 / 124

ANC10 Network Interface Card Series Installation and User’s Guide
89
Recv Segment Coalescing (IPv6)
When receiving data, the miniport driver, NDIS, and TCP/IP must all look
at each segment's header information separately. When large amounts of
data are being received, this creates a large amount of overhead. Receive
segment coalescing (RSC) reduces this overhead by coalescing a
sequence of received segments and passing them to the host TCP/IP
stack in one operation, so that NDIS and TCP/IP need only look at one
header for the entire sequence.
To enable or disable the Receive Segment Coalescing (IPv6) feature, do
the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 54.
2. Select Receive Segment Coalescing (IPv6) in the Property box.
The Receive Segment Coalescing (IPv6) window is displayed as
shown in Figure 49.
Figure 49. Receive Segment Coalescing (IPv6) Window
3. Select one of the following options:

Enabled — RSC is enabled.

Disabled — RSC is disabled. This is the default setting.