Allied Telesis ANC10 Series, Инструкция по установке и эксплуатации

Страница: 45 / 124

ANC10 Network Interface Card Series Installation and User’s Guide
45
Installing the Driver Software
Once you physically install the ANC10 Series network card, the system
detects the new hardware and creates an entry in the Device Manager
when the Windows operating system boots up. Shortly after you log in, you
need to install the driver software for your network interface card.
Note
To install the driver software, you must have administrative
privileges.
To install the driver software, do the following:
1. Access the Device Manager, see “Accessing the Windows Device
Manager” on page 43.
2. In the Device Manager window, double-click Network Adapters to
expand the field.
3. Option 1 - To have Windows search the computer for the driver, do
the following:
a. Right-click on AT- ANC10Sa/2 (or AT- ANC10T/2 ) 10G Dual Port
10BASE-T Adapter .
b. Select Update Driver .
The Update Drivers window appears. See Figure 16 as an
example.
Figure 16. Update Drivers Window
c. Select Search automatically for updated drivers .