background image

S i m p ly   c o n n e c t i n g   t h e   wo r l d

Patch Release Note

Patch 86253-07
For Rapier Series Switches

Introduction

This patch release note lists the issues addressed and enhancements made in 
patch 86253-07 for Software Release 2.5.3 on existing models of Rapier series 
switches. Patch file details are listed in Table 1.

This release note should be read in conjunction with the following documents:

Release Note: Software Release 2.5.3 for Rapier Switches and AR400 and 
AR700 Series Routers (Document Number C613-10362-00 Rev A) available 
from 

www.alliedtelesyn.co.nz/documentation/documentation.html

.

Rapier Switch Documentation Set for Software Release 2.5.1 available on 
the Documentation and Tools CD-ROM packaged with your switch, or 
from 

www.alliedtelesyn.co.nz/documentation/documentation.html

.

WARNING: Using a patch for a different model or software release may cause 
unpredictable results, including disruption to the network. Information in this 
release note is subject to change without notice and does not represent a 
commitment on the part of Allied Telesyn International. While every effort has 
been made to ensure that the information contained within this document and 
the features and changes described are accurate, Allied Telesyn International 
can not accept any type of liability for errors in, or omissions arising from the 
use of this information.

Table 1: Patch file details for Patch 86253-07.

Base Software Release File

86s-253.rez

Patch Release Date

18-Feb-2004

Compressed Patch File Name

86253-07.paz

Compressed Patch File Size

333756 bytes

Содержание 86253-07



































Отзывы: