6
Patch Release Note
Patch 86222-06 for Software Release 2.2.2
C613-10319-00 REV F
The entry aging process now works correctly even when there are large
numbers of firewall entries to be aged.
The command SHOW IP DEBUG=
n
was entered, where
n
was one greater
than the number of items in the IP debug queue resulted in a fatal error. This
issue has been resolved.
Features in 86222-02
Patch file details for Patch 86222-02 are listed in Table 5.
Patch 86222-02 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
When an interface on the firewall was configured with a global IP address
of 0.0.0.0, outgoing packets from the private interface to the public interface
sometimes caused a fatal error. This issue has been resolved.
Re-validation of temporary CA certificates now works correctly.
A fatal error occurred when IGMP received a
Join
message and attempted
to forward the
Join
message to other switch ports. This issue has been
resolved.
The SHOW CPU command sometimes displayed incorrect CPU utilisation
figures. Typically a value of about 74% was reported when in fact the CPU
was almost idle. This issue has been resolved.
Port parameters can now be set correctly using the Layer 3 Switch GUI.
Clicking the
Apply
button on a Layer 3 Switch GUI page caused the switch
to lock up if no configuration file was set, but boot.cfg was present. This
issue has been resolved.
PCR: 01150
Module: FIREWALL
Network affecting: No
PCR: 01153
Module: IPG
Network affecting: No
Table 5: Patch file details for Patch 86222-06.
Base Software Release File
86s-222.rez
Patch Release Date
26-Jul-2001
Compressed Patch File Name
86222-02.paz
Compressed Patch File Size
202564 bytes
PCR: 01081
Module: FIREWALL
Network affecting: No
PCR: 01126
Module: PKI
Network affecting: No
PCR: 01128
Module: IPG
Network affecting: No
PCR: 01131
Module: CORE
Network affecting: No
PCR: 01134
Module: GUI
Network affecting: No
PCR: 01135
Module: GUI,INST
Network affecting: No
