Allied Telesis 29M2/SP-BA, Инструкция по установке и эксплуатации

Страница: 14 / 90

29M2/SP-BA Fiber Network Adapter Installation and User’s Guide
14
Description
The 29M2/SP-BA fiber network adapter is interface boards connected with
a ribbon cable designed to be installed into the Dell OptiPlex 50 x 0 and
70 x 0 systems.
The 29M2/SP-BA fiber network adapter is equipped with an SFP slot to
add a fiber connection to the Dell systems.
After physically installing the 29M2/SP-BA fiber network adapter in the
system, start your Windows 10 and install driver software. To install driver
software, see Chapter 3, “Installing the Driver Software” on page 35.
Figure 1 shows the 29M2/SP-BA fiber network adapter.
Figure 1. 29M2/SP-BA Fiber Network Adapter
SFP Slot
The 29M2/SP-BA fiber network adapter has an SFP slot that you can plug
in an SFP transceiver to connect the system to a compatible link partner.
The link connected through the SFP slot operates at either 100Mbps or
1000Mbps (depending upon the speed of the installed SFP) and only in
full-duplex mode.
LED
The 29M2/SP-BA fiber network adapter comes with one LED as shown in
Figure 2. The LED indicates the link and activity status of the port.
Figure 2. LED
SFP board
Ribbon cable
Controller board
LED