Allied Telesis 2911 Series, Руководство пользователя

Страница: 33 / 122

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User’s Guide
33
Replacing the Bracket
The AT-2911 series adapter is shipped with the low-profile bracket
attached to the adapter. Depending on your PC, you may need to replace
the bracket attached to your adapter.
The following procedure describes how to remove the low-profile bracket
from the adapter and replace it with the standard bracket. You can also
use this procedure to remove the standard bracket and replace it with the
low-profile bracket.
To replace the low-profile bracket with the standard bracket, perform the
following procedure:
1. Remove the screws that attach the bracket to the adapter. See
Figure 10.
Figure 10. Removing the Low-Profile Bracket
2. Align the tabs of the standard bracket with the holes on the adapter
and fasten the screws onto the adapter. See Figure 11.