45-031 REV. 11/19
25
Figure 5-3, Rod Assembly
9. Use the same procedure as above to remove the seals from the gland cap.
5.5 Cylinder Inspection
IInspect the cylinder tube bore for:
1. Deep scratches or nicks
2. Signs of galling or excessive wear.
3. Out-of-roundness or deformities of the barrel.
Inspect the piston for:
1. Scratches or nicks on the seal grooves.
2. Wear on the O.D.
Inspect the cylinder rod for:
1. Scratches or nicks on the rod surface.
2. Straightness of the rod.
3. Damaged threads.
Inspect the gland cap for:
1. Scratches or nicks in the seal grooves.
2. Damaged threads or spanner wrench holes.
3. Excessive wear in bore.
Replace any component found to be defective.
