manualshive.com logo in svg

Allied Data Technologies Tornado WebJet 128, Руководство пользователя

Поделиться
Скачать
Allied Data Technologies Tornado WebJet 128 Скачать руководство пользователя страница 24

TORNADO WEBJET 128

Allied Data Technologies

24

4. 

Sundries

4.1 Settings (profiles)
The Tornado WebJet 128 has three settings: 

1. Active Profile. Current settings used with the selected protocol. 

2. Stored Profile. In this profile a number of settings (parameters and configurations) are stored in a nonvolatile memory
(E2PROM). Changes with regard to the factory settings are often set and stored to memory with AT&W. The stored profile
is loaded into the active profile on power-up on and following the AT#Z command. 

3. Factory Profile (Settings) is fixed in the terminal adapter memory (Flash EPROM). These settings are loaded into the
active profile with the AT&F command.

4.2 Nonvolatile memory settings
The Terminal Adapter settings are stored in a nonvolatile memory (E2PROM). The commands used are:

* Save register content with AT&W
* Save automatic dial-up number (40 characters maximum) with AT&Z
* MSN number function with AT#NBV120="<number> (always close with #Z).

The above commands store the settings in the nonvolatile memory, but do not become automatically active. They are
activated by using the AT#Z command or by switching the Tornado WebJet 128 off and on again. 
AT&F activates the factory settings.

Factory

Profile

Active
Profile

S Reg

Stored

Profile

Set Registers

#xxx=

&F

#Z

Powerup

&W

Содержание Tornado WebJet 128






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды