Command reference
R&S
®
ZND
902
User Manual 1173.9557.02 ─ 61
If the second optional parameter is omitted, the command stores
complex data.
<DecSeparator>
POINt | COMMa
POINt - decimal separator: point.
COMMa - decimal separator: comma.
If the third optional parameter is omitted, points are used.
<FieldSeparator>
SEMicolon | COMMa | TABulator | SPACe
SEMicolon - field separator: semicolon
COMMa - field separator: comma.
TABulator - field separator: tabulator.
SPACe - field separator: space.
If the fourth optional parameter is omitted, semicolons are used.
Example:
Usage:
Setting only
Manual operation:
MMEMory:STORe:TRACe:CHANnel
<Channel>, <TraceFile>[, <FormatInd>[,
<Format>[, <DecSeparator>[, <FieldSeparator>]]]]
Stores the trace data of all data traces in the specified channel to a trace file. Traces
are created using the
CALCulate<Ch>:PARameter:SDEFine
Tip:
*.s<n>p
Touchstone files (<n> = 1, 2, 3, ...) are intended for a complete set of
<n>-port S-parameters. Data export fails if the active channel does not contain the full
set of <n>
2
traces.
Setting parameters:
<Channel>
Channel number in the active recall set. ALL means that a sepa-
rate file is created for each channel in the active recall set.
<TraceFile>
String parameter to specify the name and directory of the cre-
ated trace file. Several file formats for trace files are supported.
The file extensions
*.s<n>p
,
*.csvc
, and
*.dat
for Touch-
stone, ASCII, and Matlab files are mandatory. To generate a
multiport Touchstone file
*.s2p
,
*.s3p...
, the channel must
contain traces for the full set of S-parameters. If no path is
specified the analyzer uses the
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
Traces
directory.
SCPI command reference
www.allice.de
Allice Messtechnik GmbH