Allice Messtechnik R&S ZND Скачать руководство пользователя страница 314 | Manualshive

Страница: 314 / 1252

Allice Messtechnik R&S ZND Скачать руководство пользователя страница 314

GUI reference

R&S

®

ZND

314

User Manual 1173.9557.02 ─ 61

Field Separator

For ASCII (

*.csv

) and Matlab (

*.dat

) export only: defines the separator the analyzer

uses to separate different numbers in each line of the file.

Decimal Separator

For ASCII (

*.csv

) files only: Selects either the "Point" or the "Comma" (if needed to

process the exported data with an external application) as a separator for decimal
numbers.

Save

Stores the trace data, according to the selected options.

Tip:

Note the conditions described in

"Conditions for Touchstone file export"

Remote command:

MMEMory:STORe:TRACe:PORTs
MMEMory:STORe:TRACe
MMEMory:STORe:TRACe:CHANnel

Comment Added to File

Defines a comment to be added to the exported trace data file.

If empty (←"Delete"), no comment is added.

Remote command:

MMEMory:STORe:TRACe:OPTion:COMMent

5.5.11.3

Select Parameter dialog

The "Select Parameter" dialog provides a selection of measurement results (e.g. S-
parameters) or traces, e.g. for trace import, import of power correction coefficients, limit
line import.

Access:

The dialog may be called from several dialogs, for example on pressing

"Open" in the

Import Complex Data dialog

Select All / Deselect All

During trace data import, selects/deselects all traces contained in the opened trace file.

Auto Distribute

Available for trace data import only.

If checked, a selected trace S

ij

is imported as a memory trace for all data traces in the

current recall set that are measuring S

ij

.

Trace Config softtool

www.allice.de

Allice Messtechnik GmbH

«
...
312
313
314
315
316
...
»

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов