Allice Messtechnik R&S ZND Скачать руководство пользователя страница 283

Страница: 283 / 1252

GUI reference

R&S

ZND

283

User Manual 1173.9557.02 ─ 61

Active Trace vs. Active Data Trace

In the context of memory traces we distinguish between the active trace and the active
data trace.

●

If the active trace is a memory trace, then the active data trace is the data trace to
which the memory trace is associated.

●

If the active trace is a data trace, then the active trace is also the active data trace.

Data to <Destination>

Stores the current state of the active data trace to the

Destination

memory trace. No

trace functions are applied to the stored trace.

Tips:

●

Use

Data & Func to <Destination>

to apply trace functions to the stored trace.

●

You can also create memory traces using the

Import Complex Data dialog

●

It is not possible to store

Hold

traces to memory.

●

For the relation between a data trace and its associated memory traces, see

"Cou-

pling of data and memory traces"

on page 282.

Remote command:

CALCulate<Chn>:MATH:MEMorize
TRACe:COPY

Data & Func to <Destination>

Stores the current state of the active data trace – including trace functions – to the

Destination

memory trace.

Trace functions

The trace functions comprise the following mathematical operations:

●

Active trace math on unformatted and formatted traces, as configured in the

Chap-

ter 5.5.4, "Math tab"

on page 285.

●

A shift of the data trace (see

"Shift Trace"

on page 306).

Data to <Destination>

stores the raw trace without the trace functions, "Data & Func to

<Destination>" stores the trace after it has been transformed using the trace functions.

For the relation between a data trace and its associated memory traces, see

"Coupling

of data and memory traces"

on page 282.

Remote command:

CALCulate<Chn>:MATH:MEMorize
TRACe:COPY:MATH

Destination

Selects the destination for the

Data to <Destination>

and

Data & Func to <Destination>

operations.

The destination can be one of the following:

●

An existing memory trace of the active data trace.
The existing memory trace is overwritten.

●

"New Trace"
The data are copied to a new memory trace, associated to the current data trace.

Remote command:
n/a

Trace Config softtool

www.allice.de

Allice Messtechnik GmbH

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R&S ZND

Отзывы:

Allice Messtechnik R&S ZND, Руководство пользователя, Страница: 283 / 1252

Результаты поиска

Содержание R&S ZND

Отзывы: