Allice Messtechnik R&S ZND, Руководство пользователя, Страница: 279 / 1252

GUI reference
R&S
®
ZND
279 User Manual 1173.9557.02 ─ 61
●
Use the "On" flags in the "Trace Manager" to show/hide arbitrary sets of traces
(see
Chapter 5.5.1.3, "Trace Manager dialog" , on page 279).
Disable all other Measurements/Enable all Measurements
Toggle button with alternating caption.
Same functionality as the toggle button of the Chapter 3.3.2.2, "Toolbar" ,
on page 46
"Disable all
other Measure-
ments"
●
Disables all channels, except the active one
●
Disables all traces in the active channel, except the active one
●
Hides all diagrams except the active one
"Enable all
Measure-
ments" Restores the previous channel/trace/diagram configuration
Same functionality as the
5.5.1.2 New Trace dialog
The "Trc+" tool bar button allows you to create a trace in the active channel.
●
Tap/click the "Trc+" button to duplicate the active trace (equivalent to Add Trace ).
●
Drag the respective button onto the diagram area to create the trace in any other
existing diagram or in a new one.
After the button has been dropped, the "New Trace" dialog pops up and lets you
select the quantity to be measured.
left = bidirectional R&S ZND
right = unidirectional R&S ZND
5.5.1.3 Trace Manager dialog
The "Trace Manager" dialog allows you to perform operations on traces.
Access: TRACE – [TRACE CONFIG] > "Traces" > "Trace Manager..."
Trace Config softtool
www.allice.de Allice Messtechnik GmbH