Allice Messtechnik R&S ZND Скачать руководство пользователя страница 138 | Manualshive

Страница: 138 / 1252

Allice Messtechnik R&S ZND Скачать руководство пользователя страница 138

Concepts and features

R&S

®

ZND

138

User Manual 1173.9557.02 ─ 61

●

"Version 1.1" and "Version 2.0" export formats

These export formats always use single-ended identifiers

Sij

and port numbers 1

to n in the table header.

! freq[Hz] S11[Re] S11[Im] ...

The mapping between nominal (single-ended) and actual – possibly balanced –
ports is given in the

port assignments

comments.

Port assignments (Version 1.1 and Version 2.0)

For export format "Version 1.1 (ZNx)", the assignments are given in the

comment lines. For export formats "Version 1.1" and "Version 2.0", they

are declared in a dedicated comments section:

! Port Assignments:
! Nominal Port -> Actual Test Port
! --------------------------------
! 1 -> 2
! 2 -> 1

For balanced ports, the port assignment looks like in the following example:

! Port Assignments:
! Nominal Port -> Actual Test Port
! --------------------------------
! 1 -> D1,2
! 2 -> C1,2

The "s1p Active Trace" export, which allows to dump an arbitrary S-parameter trace to
an

s1p

file, explicitly mentions the exported parameter:

! Trace info:
! Nominal Param -> Actual Exported Buffer
! ---------------------------------------
! S11 -> S21

User comment

The analyzer's trace export function allows you to insert a custom comment line into
the export file.

! My Comment

Keywords (version 2.0 only)

Keywords are enclosed in square brackets, “[“ and “]”, and start at the beginning of a
line. Arguments after keywords (if any) are separated from the closing bracket and
from each other by at least one blank (or tab).

[Keyword] argument1 argument2 ...

Keywords are new in Touchstone standard version 2.0. They are not allowed in version
1.1 files.

Operations on traces

www.allice.de

Allice Messtechnik GmbH

«
...
136
137
138
139
140
...
»

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов