说明书
BAA375.1(VL1500D)
Welcome to the ALLIANCE! By purchasing your new ALLIANCE Audio amplifier you are joining a
widespread movement dedicated to bringing power, performance, and value to the world of
car audio.
Before installing and using your new ALLIANCE Amplifier, please review and become familiar
with all of the information in this manual.
Do not open or attempt to repair this amplifier yourself. Potentially dangerous levels of high
voltage are present which may result in electric shock. Should you experience the need for
service, please return your amplifier to the Authorized ALLIANCE Audio dealer from whom you
purchased the unit for any required service.
ALLIANCE Audio recommends that all ALLIANCE Audio products be installed by Authorized
ALLIANCE Audio dealers for optimum performance.
Safety First!
Before you drill or cut any holes, look at your vehicle layout very carefully. Be very
careful when you work near the gas tank, fuel lines, hydraulic lines, and electrical wiring.
Mount before using. This will protect against damage and shorts that may occur with
movement.
Disconnect your battery before making or breaking power connections.
Confirm your source unit is powered off while connecting input jacks and speaker
terminals.
Make sure to use an inline fuse for your mono amplifier installations. Fuse size
recommendations are located at the end of the manual.
Mount Up!
Find a suitable location in the vehicle in which to mount your ALLIANCE Amplifier.
Make sure there is sufficient air circulation.
Mark the location where you are mounting the amplifier and use a scribe or mounting
screw to mark the locations of the mounting holes.
Drill pilot holes (remember, check behind anything you are drilling) and then mount the
amplifier.
