Error Code Programming
Error-
E Ld-
E Ld-
Water Leak Detection Error Menu - This
error checks for whether the machine is
leaking water by adding 1 minute to the
cycle to check for water leaks.
E Ld 1
Water Leak Detection Day(s) of Week
Enable - Allows owner to pick which
days to check for water leaks.
E Ld 2
Water Leak Detection Number of Cycles
Between - Sets how many cycles must
run before water leaks are checked again.
E Ld 3
Water Leak Detection Display Sequence
(On/Off) - Will show a moving dash "-"
across the 7-segment display while the
water leak detection is being performed.
E Sd-
Slow Drain Detection Error Menu
E Sd 1
Slow Drain Detection (On/Off) - Ena-
bles/Disables the error
E Sd 2
Slow Drain Detection Adjust - Allows
the owner to add time in seconds to the
machine's default draining time used to
detect for slow draining conditions.
Helps allow for locations with poor
draining conditions.
ovrFLd
ovrFLd
Overflow Mode Display - Can be used to
disable "oFLo" on the display while in an
Overflow Condition during a running cy-
cle if set to Off. In all other modes, it will
always show "oFLo" if an overflow con-
dition exists.
CLrErr
CLrErr
Allow Error Clearing (On/Off) - Allows
the ability for the owner to clear most er-
rors by pressing NORMAL PERM
PRESS keypads. Some errors will still
require power to be cycled to clear the er-
ror and some errors will continually set
themselves until the condition for the er-
ror being set is fixed. Call for service if
an error will not clear.
Table 5
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
46
Part No. 204370ENR1
Содержание SWNNC2HP115TQ01
Страница 2: ......
