R520m. For other cell phones with Bluetooth, such as Ericsson T68, Ericsson
T39, Nokia 6310, are nearly the same procedure.
7.1 Switch the car kit on
. (Approximately 2 sec) and there is ring tone
means the car kit is turn on, then press Talk button
(Approximately
2 sec.) till
the red and green LED is blinking (
is
Red LED and
.
Is Green LED) that the car kit is in the pairing mode then you can go to
step 7.2.to pair with your mobile phone.
7.2 Ericsson
R520m
7.2.1
Enter the “menu” (press left/right key) of the cell phone. Choose
point 5 called “Extras” by pressing “YES”
7.2.2
In the subdirectory “Extras” select the point 4 “Bluetooth”. This
subdirectory handles the whole Bluetooth settings.
7.2.3
The subdirectory “Bluetooth” offers four menu commands:
7.2.3.1
Discoverable:
Other Bluetooth devices are allowed to
see the mobile phone for three minutes. After three
minutes the cell phone asks if the cell phone should
remain discoverable.
7.2.3.2
Paired devices:
Contains a list of all paired devices.
7.2.3.3
Discover:
To search for other Bluetooth devices
activate this point. After a while it displays all searching
results.
7.2.3.4
Operation mode:
Defines the operation mode of the
cell phone such as on, off, or automatic (depending on
what you want the phone to do). To look for the CSR
headset choose point 3 “Discover” in the Bluetooth
subfolder.
7.2.4
The phone displays a progress bar with the title “Searching”.
Then it displays all the searching results. At the left side the
phone shows a headset symbol. Choose the “CSR-bc2” with this
headset symbol to select the CSR headset solution by pressing
“YES”.
7.2.5
The next step adds the headset to the paired device; therefore
press “YES”. (If there is already a headset device paired, it
appears an hint on the display)
