© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
F8138701
16
Operating Instructions
(UniLinc Control)
1. When display shows the Cycle Menu Screen
washer-extractor is ready to be loaded with
laundry.
2. Press the door unlock button located on the lower
left front on the control. Refer to
Figure 8
.
Figure 8
3. Open door within five seconds of pressing the
door unlock keypad.
4. On 35 – 125 models, turn door handle clockwise
and swing the door left to open. Door must be
opened within 5 seconds of pressing the door
unlock button. Refer to
Figure 9
.
Figure 9
5. On 150 models, turn handle counterclockwise
and swing the door right to open. Door must be
opened within 5 seconds of pressing the door
unlock button. Refer to
Figure 10
.
Figure 10
6. Load the washer-extractor to full capacity
whenever possible, but do not exceed the rated
dry-weight capacity of the machine if the fabric
to be washed is quite dense, closely woven, and
heavily soiled.
Overloading can result in an inferior wash. The
operator may need to experiment to determine
load size based on fabric content, soil content,
and level of cleanliness required. Do not
underload the machine. Underloading can result
in premature bearing and sealing failure and out-
of-balance situations.
Figure 11
PHM705N
PHM791N
PHM705N
UW35 – UW150 MODELS
PHM791N
UW35 – UW125 MODELS
PHM717N
PHM590N
UW150 MODELS
WARNING
MACHINE MAY BE HOT
AND CAUSE BURNS
ATTEMPT NO ENTRY UNTIL
BASKET HAS STOPPED
SERIOUS INJURY MAY RESULT
