-28-
802753
Filter Screens
Check the filter screens in the fill hoses for debris
or damage annually. Clean or replace them if
necessary.
If the washer is filling with water slower than
normal, check the filter screens. Clean or replace
them if necessary.
Order filter screen Part No. F270300 from the
nearest authorized parts distributor.
Vacations and Extended
Non-Use
•
To avoid possible property damage due to
flooding, turn off the water supply to the
washer whenever there will be an extended
period of non-use.
•
Leave the loading door open during extended
periods of non-use to allow the wash drum to
dry out and avoid a musty smell.
Reinstallation of Shipping
Materials
To prevent damage while moving the unit, the
shipping materials MUST be reinstalled.
•
Disconnect washer from electrical supply.
•
While supporting the front access panel,
remove two screws from the bottom edge of
the panel.
•
Gently lower the panel to remove it from the
washer.
•
Place the shock sleeves on all four shock
absorbers. Refer to the illustration below.
•
Insert hooked end of shipping brace into the
open slot of the motor mount.
•
Attach the brace with the five bolts and
washers. Refer to the illustration below.
•
Reinstall front access panel.
Refer to the INSTALLATION INSTRUCTIONS for
proper procedures whenever the washer is moved.
Cleaning Foreign Object Trap
The washer’s pump has a trap that may collect
foreign objects. The trap may need to be cleaned if
water is draining slower than usual. To clean:
•
Disconnect washer from electrical supply.
•
While supporting the front access panel,
remove two screws from the bottom edge of
the panel.
•
Gently lower the panel to remove it from the
washer.
NOTE: The pump may have some water in it. Use
a rag or a container to catch water. If the wash
drum is full of water, use a wet/dry shop vacuum
to catch the water.
•
With rag or vacuum ready, unscrew the cap
on the left side of the pump and remove trap.
•
Clean the debris from the trap.
•
Reinstall the trap and access panel.
•
Reconnect washer to electrical supply.
FLW2182N
FLW21
8
2N
Shock
Sleeves
Bolts and Lockwashers
Motor
Mount
Hooked End of
Shipping Brace
