Alliance Laundry Systems PD3JGBGS403UG01, Программирование

Страница: 29 / 40

NOTE: The vend price can be set from 0 to 65,535.
The default value is 200.
NOTE: The vend price can be set from 0 to 65,535.
The default value is 25.
NOTE: To go back to the current programmable op-
tion without changing the value press the MED
TEMP (<) keypad.
5. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
increase or decrease the value of the active digit and the
START (enter) keypad to enter the value of the digit and ad-
vance to the next digit.
6. Press the START (enter) keypad with the last active digit. The
new value is saved and the next option will appear in the dis-
play.
Cycle Time
CyCt
This option allows the owner to set the amount of time for all cy-
cles.
1. Control must be in Manual Mode. Refer to
Entering the Man-
ual Mode .
2. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad un-
til
Prog
appears in the display. Press the START (enter) key-
pad and
AtS H
will appear in the display.
3. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
scroll through the programmable options until
CyCt
appears
in the display.
4. When
CyCt
appears in the display, press the START (enter)
keypad. There are four programmable cycle time options. Re-
fer to
Table 1 .
Display Cycle Time Options
CyCt 1
Heat Cycle Time Minutes
(1-99)
CyCt 2
Heat Cycle Time Seconds
(0-59)
Table 1
5. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
select the desired cycle time option.
NOTE: Cycle time can be set from one (1) to 99 mi-
nutes.
NOTE: The default value for both cycles in minutes
is 45 and the default value for seconds is 0.
6. Press the START (enter) keypad when the correct option ap-
pears in the display.
7. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
increase or decrease the number of minutes or seconds dis-
played to the desired number of minutes or seconds.
8. Press the START (enter) keypad when the correct number of
minutes or seconds appears in the display. The new value is
saved and the next option in the parameter will appear in the
display.
Top-Off Data
toP-
This option allows the owner to set the amount of top-off time for
Coin #1 and Coin #2.
1. Control must be in Manual Mode. Refer to
Entering the Man-
ual Mode .
2. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad un-
til
Prog
appears in the display. Press the START (enter) key-
pad and
AtS H
will appear in the display.
3. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
scroll through the programmable options until
toP-
appears
in the display.
4. When
toP-
appears in the display, press the START (enter)
keypad. There are five programmable top-off options. Refer
to
Table 2 .
Display Top-Off Options
toP 1
Top-Off ON/OFF
toP 2
Coin 1 Top-Off Time Mi-
nutes (0-99)
toP 3
Coin 1 Top-Off Time
Seconds (0-59)
toP 4
Coin 2 Top-Off Time Mi-
nutes (0-99)
toP 5
Coin 2 Top-Off Time
Seconds (0-59)
Table 2
NOTE: If Top-Off is enabled, each coin entered will
add a top-off time. If Top-Off is disabled, the full
vend price must be entered to add time.
5. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
select the desired top-off option.
6. Press the START (enter) keypad when the correct option ap-
pears in the display.
7. Press the LOW TEMP (
∧
) or the DELICATES (
∨
) keypad to
increase or decrease the number of minutes or seconds dis-
played to the desired number of minutes or seconds.
NOTE: Top-Off minutes can be set from 0 to 99 mi-
nutes and Top-Off seconds can be set from 0-59
seconds. The maximum amount of time for a cycle,
including the top-off time, is 99 minutes. The mini-
mum amount of time is 10 seconds.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
29 Part No. D515810ENR3