Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 53 / 79

800000
51
26. Extra Rinse “Ern”
This option allows the user to have an extra rinse
during the wash cycle.
How to Program Extra Rinse
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD, Figure 79.
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until
“Ern”
appears in the VFD. See Figure 80.
4. When
“Ern”
appears in the VFD, press the PERM
PRESS pad. The current Extra Rinse selection
number will appear in the VFD.
NOTE: If the VFD displays “000” , the Extra Rinse
option is OFF. If the VFD displays “128” , the Extra
Rinse option is ON.
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the current three digit
number to
“000”
or
“128.”
See Figure 81.
6. Press the PERM PRESS (enter) keypad when the
correct number appears in the VFD. The next
option,
“rrn”
, will appear in the VFD.
NOTE: To program “rrn” (Warm Rinse), see
option 27. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Figure 79
Figure 80
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C128IE1A
Figure 81
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A