Pre-Wash
The Pre-Wash option adds a second wash to the selected cy-
cle.
Second Rinse
This Option will provide an additional rinse to the selected cy-
cle. The water temperature will be cold.
Third Rinse
The Third Rinse Option provides two additional rinses. It is use-
ful for detergent sensitive skin. The water temperature will be
cold.
NOTE: If Second Rinse and Third Rinse are both selec-
ted, the cycle will provide a total of three additional rin-
ses.
Delay Start
Pressing the Delay Start Option will allow the cycle to begin up
to 24 hours after pressing the keypad. Pressing it once will de-
lay the cycle by one hour and 1h will show on the control’s dis-
play. Press the Delay Start keypad again to increase the time
by one hour each press. Press the Start/Pause keypad to be-
gin the countdown.
While setting the Delay Start Option, the cycle time and the
Delay Start keypad light will flash (1 second on/off).
After the Delay Start Option is started, the Delay Start keypad
light will flash (1 second on/off).
Signal
Pressing the Signal keypad will change the end of cycle signal
volume. There are four settings: Off, Low, Medium, High.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will
turn on the Control Lock. The Control Lock status light will be
lit. While Control Lock is on, no other keypad presses are al-
lowed. Press and hold the Signal keypad again to turn the op-
tion off.
Status
The Status lights are lit during the cycle to show what part of
the cycle is running.
Wash
The Wash status light is lit during the
wash portion of the cycle including Pre-
Wash and Soak, if selected.
Rinse
The Rinse status light is lit during the
rinse portions of the cycle including Sec-
ond Rinse and Third Rinse, if selected.
Spin
The Spin status light is lit during the final
spin portion of the cycle.
Door Lock
The Door Lock status light is lit whenever
the door is locked. The door cannot be
opened while it is lit.
While the door is locking, the door lock status light flashes (1
second on/1 second off). While unlocking, the door lock status
light stays lit and the cycle time flashes (1 second on/1 sec-
ond off).
To Wash Clothes
IMPORTANT: Before using your new washer, make
sure the washer cord is connected to an appropriate
electrical outlet that is properly installed and connec-
ted to a protective earth/ground. Make sure the washer
hoses are connected to the hot and cold water faucets,
and that the faucets are turned on. Be sure the drain
hose is not kinked and is inserted into a drain. Refer to
the INSTALLATION INSTRUCTIONS for details of prop-
er washer installation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash
drum.
1. Get the clothes ready for washing. Empty pockets and
cuffs. Sort items into separate loads. Pretreat stains and
heavily soiled areas.
IMPORTANT: Remove all sharp objects from laundry
to avoid tears and rips to items during normal ma-
chine operation.
2. Measure and add low sudsing, high efficiency (HE) deter-
gent, fabric softener and bleach to the dispenser drawer.
Refer to section on Using Your Dispenser Drawer. Follow in-
structions on detergent package for amount to use.
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13
Part No. 806970EN
Содержание FF7005SN
Страница 2: ......
