background image

Page 2

WARNING:

  To avoid fire hazard, do not dry articles containing foam rubber or similar texture materials.

Do not put into this dryer flammable items such as baby bed mattresses, throw rugs, undergarments

(brassieres, etc.) and other items which use rubber as padding or backing.  Rubber easily oxidizes causing

excessive heat and possible fire. These items should be air dried.

WARNING

:  Synthetic solvent fumes from drycleaning machines create acids when drawn through the

dryer. These fumes cause rusting of painted parts, pitting of bright or plated parts, and completely

removes the zinc from galvanized parts, such as the tumbler basket. If drycleaning machines are in the

same area as the tumbler, the tumbler's make-up air must come from a source free of solvent fumes.

WARNING

:  Do not operate without guards in place.

WARNING:  

 Check the lint trap often and clean as needed but at least a minimum of once per day.

WARNING: 

 Alterations to equipment may not be carried out without consulting with the factory and

only by a qualified engineer or technician.  Only

 Manufacturer’s

 parts may be used.

WARNING:

  Remove clothes from dryer as soon as it stops. This keeps wrinkles from setting in and

reduces the possibility of spontaneous combustion.

WARNING:

  Be safe - shut main electrical power and gas supply off externally before attempting

service.

WARNING: 

 Never use drycleaning solvents, gasoline, kerosene, or other flammable liquids in the dryer.

FIRE AND EXPLOSION WILL OCCUR.  NEVER PUT FABRICS TREATED WITH THESE LIQUIDS

INTO THE DRYER. NEVER USE THESE LIQUIDS NEAR THE DRYER.

            WARNING:

  Do not place items exposed to cooking oils in your dryer. Items contaminated

with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

WARNING:

  Never let children play near or operate the dryer. Serious injury could occur if a child

should crawl inside and the dryer is turned on.

WARNING: 

 Never tumble fiberglass materials in the dryer unless the labels say they are machine

dryable.  Glass fibers break and can remain in the dryer.  These fibers cause skin irritation if they

become mixed with other fabrics.

WARNING: 

 Before operating gas ignition system - purge air from natural gas or propane gas lines

per manufacturer’s instructions.

WARNING:

  To reduce the risk of electric shock, disconnect this appliance from the power supply

before attempting any user maintenance other than cleaning the lint trap. Turning the controls to the

OFF position does not disconnect this appliance from the power supply.

IMPORTANT NOTES - PLEASE READ

Содержание Drying Tumbler 110 Pound Capacity Part No. D0583

































Отзывы: