Alliance Laundry Systems D1528ENR3, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 24

NOTE: By default, the water level reduction is set to
20%, but can be adjusted by using the Cygnus As-
sist programming software.
NOTE: The water level reduction will only last for
the current cycle.
NOTE: The water level reduction can also be selec-
ted while a cycle is in process by pressing the ECO
Wash Keypad.
NOTE: The ECO Wash keypad is only available on
OPL controls.
CFD813N_SVG1
1
1. ECO Wash Keypad
Figure 6
7. For vended models only, make payment. Refer to Figure 7 .
DRY2317N_SVG
Figure 7
8. Start the cycle by pressing the START keypad. Refer to Fig-
ure 8 .
CFD820N_SVG
Figure 8
As the cycle progresses, the cycle step LEDs turn on an off, indi-
cating the step that is in process. Refer to
Figure 9 .
CFD821N_SVG
1
1. Cycle Step LEDs
Figure 9
While the cycle is in progress, the display alternates between the
water temperature and the remaining cycle time. When the water
temperature is shown in the display, the water temperature LED
is lit. When the remaining cycle time is shown, the cycle time
LED is lit. Refer to
Figure 10 .
CFD586N_SVG
2 1
1. Water Temperature LED
2. Remaining Cycle Time LED
Figure 10
9. The cycle will continue until its completion. When the cycle
is complete, “ End” appears in the display and the door is un-
locked.
Information Menu – STANDARD Control
While a cycle is in progress, the operator may view the basket’s
rotation speed, water temperature and water level by accessing
the Information Menu.
1. To access the Information Menu...
a. Press and hold the 1 keypad.
b. While continuing to press the 1 keypad, press and release
the 2 keypad.
Cygnus Operation
D1528ENR3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 11