Alliance Laundry Systems BCA Series, Установка, эксплуатация и обслуживание

Страница: 99 / 112

Operation
Operating Instructions
1. Turn on main power source (circuit breaker).
2. Turn handle clockwise to open. Refer to
Figure 52 .
CHM2243N_SVG
Figure 52
3. Load to capacity whenever possible. DO NOT OVERLOAD.
Refer to Figure 53 .
NOTE: Underloading can cause out-of-balance con-
ditions that can shorten machine life.
CAUTION
Be careful around the open door, particularly
when loading from a level below the door. Impact
with door edges can cause personal injury.
SW025
U003I_SVG
Figure 53
NOTE: When washing items which may disintegrate
or fragment, such as mop heads or sponges, use
laundry nets to prevent drain blockage.
IMPORTANT: To prevent out-of-balance conditions,
premature wear or damage to machine when using
laundry nets, use several small nets in a load.
4. Close the door and turn handle counter clockwise. Refer to
Figure 54 .
CHM2244N_SVG
Figure 54
5. Refer to OPL Control Instructions to select and start a cycle.
CAUTION
Water cannot be extracted from rubber backed
items. To avoid damage to machine from out of
balance conditions, do not use a spin (extract)
step when washing rubber backed items. Warran-
ty will be voided.
W880
WARNING
To prevent personal injury, avoid contact with in-
let water temperatures higher than 125° Fahren-
heit [51° Celsius] and hot surfaces.
W748
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
99 Part No. F8619501ENR11