© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
22
9-05-72
Upgrading the Washer Extractor’s Firmware
(cont.)
7. Connect the programming cable between the computer and the washer-extractor.
8. Press and hold the
Start
button on the washer-extractor’s control.
9. While continuing to hold the
Start
button, re-connect power to the washer-extractor. The washer-
extractor’s control displays vX.XX, where “X.XX” is the version number of the control’s
firmware.
NOTE: The firmware must be sent from the computer to the washer-extractor within 15
seconds from when the firmware version number is displayed.
10. In the Alliance Planner software, click
Open
. Refer to
Figure 4
. The firmware file is sent from the
computer to the washer-extractor.
11. Turn the washer-extractor’s
Run/Program
switch to the
Run
position.
Figure 4
CFD1004R
Open
