Alliance Laundry Systems AFNE9BSS, Руководство пользователя

Страница: 25 / 26

Washer Symptom Possible/Cause Solution
Er, dl on digital display • This code indicates that the door has not locked.
• Make sure the door is closed all the way and try to start the
cycle.
• Open the door or unplug the machine to clear the code.
• If this code continues, call for service.
Er, ub on digital display • This code indicates that the wash load was unbalanced.
• The unbalanced load may have limited the spin speed.
• Be sure to use proper load sizes.
• Open the door or press the Power/Cancel keypad to clear this
code.
PF on digital display • This code will be displayed if the control was in Delay Start
Mode when a power failure occurred.
• The delayed start will be canceled.
• Press the Power/Cancel Pad to clear the code.
Er, SL on digital display • This code will be displayed after a cycle for one minute, or until
the Power/Cancel keypad is pressed, and indicates an over-
sudsing condition.
• Laundry load may be oversudsing. Make sure you are using low
sudsing, high efficiency (HE) detergent. If using non-HE deter-
gent, use only 1/2 of the detergent manufacturer's recommen-
ded amount.
• Laundry load may be overloaded. Make sure you are using prop-
er load sizes.
Sr, cycle time remaining on digital display • The control has detected an oversudsing condition and is run-
ning a special routine to remove the excess suds.
Contact Information
If service is required, contact the nearest Factory Authorized
Service Center.
If you are unable to locate an authorized service center or are un-
satisfied with the service performed on your unit, contact:
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, Wisconsin 54971-0990
www.alliancelaundry.com
Phone: (920)748-3121, Ripon, Wisconsin
+32 56 41 20 54 Wevelgem, Belgium
Date Purchased __________________________
Model Number __________________________
Serial Number __________________________
FLW2305N_SVG
1
1. Serial Plate
When contacting us about your washer, PLEASE GIVE THE MODEL
AND SERIAL NUMBERS. The model and serial numbers are located
on the serial plate. The serial plate will be in the location shown.
Troubleshooting
Part No. 805004R3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 25