UM A.B.E. - MIXWEL
9
Opening of the door and insertion of the blender bag
•
Lift the ambidextrous handle to open the door;
•
access to the blender chamber;
•
slide into the blender chamber the blending bag containing the sample and
the diluent (max. volume 400 mL). The bag is positioned automatically in
the tank for accidental spills;
•
take care to remove the air from the bag by gently smoothing the sides of
the bag upward.
Selecting the parameters
•
Time:
o
You can set the duration from 30 seconds to 180 and in the Continuous
mode;
o
select the desired value by scrolling the right knob.
Closing of the chamber and auto-start function
•
Gently lower the handle upwards. The blending cycle starts automatically
once the door is closed;
•
the progress of the cycle is displayed through the knob backlights of the
central pictogram.
Note: in case of emergency, open the door, the device stops automatically
End of
cycle
•
Once the selected time delay is over, the blender stops;
•
the luminous knob flashes: the operator is well aware about the end of the
cycle, even if he stays away;
•
the blades move back slightly to facilitate removal from the bag;
•
lower the handle to open the door;
•
at the door opening, you can remove the bag.
