background image

PAGE

  18

www.allfett.net

The warranty period is two years from the date of delivery.
The product including all its components is under the warranty of our company.
In case of defects within the warranty period the period spent in repairing is added to the warranty
period. The repairing period is maximum 30 days. This period starts from the date of delivery of
the product to the services centers or to the seller, the agency the representative, the importer or
the manufacturer of the product respectively, in case there are service centers.
In case the product has material, workmanship or manufacturing defects, the product will be
repaired free of charge and expenses of any sort including labor, the value of the parts replaced
or any our charges.
The product will be replaced free of charge;
  -  If the product permanently disfunctions due to repeating the same defect more than four times
within the warranty period
  -  If the maximum period for repairing is exceeded.
  -  If it is determined that the defect cannot be repaired by report written by the service, or in
the absence of service centers, by the seller, agency, representative, importer or manufacturer of
the product respectively.
The present warranty does not cover damages resulting from importer handling by deviating from
the instructions in the manual.
General administration of protection of consumer rights and competition in the ministry of industry
and commorce may be applied for problems concerning the warranty certificate.

1.
2.
3.

4.

5.

6.

7.

WARRANTY CONDITIONS

DANGEROUS OR HARMFUL CONDITIONS TO ENVIRONMENTAL AND
HUMAN HEALTH DURING USE

All ALLFETT systems are producing according to relevant provisions of security regulations. There

is no risk for environmental and human health during use.

TRANSPORT AND STORAGE

There are no restrictions on transportation by land, air and sea. In general, products should be

stored in a dry and dust-free environment. The storage temperatures are between -10°C and +40°C.

All products are packed with paper based support matarial to reduce damage. Upon receiving the

package please check the items for possible damage.

Содержание Multi Line ALL-25 Series





















Отзывы: