manualshive.com logo in svg

allen MPS9910, Инструкция по безопасности и эксплуатации, Страница: 12 / 40

Поделиться
Скачать
allen MPS9910 Скачать руководство пользователя страница 12

Technical Specifications

Measurements in this manual are in U.S. units and their customary metric units (i.e., metric units 
contained within brackets [cm]). The machine RIGHT-HAND and LEFT-HAND sides are determined by 
standing at the rear of machine facing in the direction the machine will travel when going forward.

Machine Features:

Dimensions - (L x W x H) inch [cm] ..................................................................... 150.2 x 87.6 x 68.8

 

[381.5 x 222.5 x175]

Weight lb [kg] ...................................................................................................................1,940 [880]

Gross Axle Weight Rating lb [kg] ....................................................................................7,000 [3,175]

Gross Vehicle Weight Rating lb [kg] ...............................................................................6,540 [2,966]

Payload Capacity lb [kg] ................................................................................................4,600 [2,086]

Wheel Size .................................................................................................................................... 16”

Tire ................................................................................................................................ST235/80R16

Flat Mount Tow Ring.................................................................................................................2-1/2”

Flat Mount Trailer Coupler ......................................................................... 2-5/16”, 21,000 lb MGTW

Trailer Electrical Wiring ............................................................................................. 4-Flat Connector

Maximum Flat Washer Flow Rate gpm [lpm] .............................................................................9 [34]

Max Pressure psi [bar] ...........................................................................................................580 [40]

Spray Boom Unfolded Length inch [cm] ............................................................................170.8 [434]

Spray System Capacity ......................................................180 gal - 550 gal Tote or (2) 55 gal Barrel

Fuel Capacity gal [L] ..........................................................................................................0.825 [3.1]

Run Time (Approximate) hr ............................................................................................................2.2

075770 

Page 12

General 

Information

Содержание MPS9910









































Отзывы:

Нет отзывов