allen MP215 Скачать руководство пользователя страница 64

Страница: 64 / 103

053383 - 07/2017

4-2

SECTION 4

PARTS

Factory Service Information

This section contains the illustrated drawings and parts list for help in identifying and/or ordering

replacement parts for your machine. Follow the instructions in the front section of this manual

“Ordering Parts” when ordering replacement parts to insure prompt and accurate delivery.

The Right Hand (RH) and/or Left Hand (LH) orientations are defined from the operator’s view of

sitting on machine (SOM).

All set screws have blue (LOC-TITE™) applied at the

factory. If set screw is removed or loosened for any

reason re-apply blue (LOC-TITE™).

All grease fittings are capped with CAP PLUG GC-5

(AEC PN 015692) to protect the fitting. If cap becomes

missing or damaged replace it as soon as possible.

Anti-Seize is applied at the factory to all drive line coupling,

gearbox main and counter shafts and pitch control threaded rod

assemblies. If these parts are disassembled re-apply a light

coat of a graphite based anti-seize.

Содержание MP215








































































































Результаты поиска

Содержание MP215

Отзывы:

Бренды по названию

Популярные бренды

allen MP215, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MP215

Отзывы:

Бренды по названию

Популярные бренды