allen AR16 Скачать руководство пользователя страница 35

Страница: 35 / 114

2.1.1 Description

The versatile Allen Power Buggy is perfect for any job-site or work area that requires hauling

loads conveniently and effortlessly. With side-to-side and front-to-back lift pockets, the Allen

Power Buggy can be fork-lifted for easy on and off job-site loading. Whether your work requires

a rubber tire or track driven hauling machine, Allen has the dependable, reliable and powerful

power buggy for hauling and transporting your loads.

The sixteen cubic foot AR16 and the twenty-one cubic foot AR21 have earned their rank as the

standard by which all power buggies are judged. Their massive two-inch thick solid steel tank-

tough frames provide unparalleled strength and durability along with a lower center of gravity and

ideal weight distribution. These buggies give excellent traction in real-world job site conditions.

Drive components are protected by a removable steel shroud. This shroud is louvered to keep

concrete out while providing proper ventilation and cooling to the engine compartment. The stan-

dard high-strength, high-density polyethylene bucket is the industry’s thickest and most durable.

And standard features like heavy-duty hydraulic wheel motors, steel raceways for hydraulic hose

protection and optional foam-filled tires ensure the AR16 and AR21 Power Buggies will operate

for the duration under tough conditions.

www.facebook.com/AllenEngineering

@alleneng

www.youtube.com/AllenMachinery

LIKE US!!!

WATCH US!!!

VISIT US!!!

www.alleneng.com

2.1 - Introduction

SECTION 2

OPERATIONS

055838

Page 35

Содержание AR16



















































































































Результаты поиска

Содержание AR16

Отзывы:

Бренды по названию

Популярные бренды

allen AR16, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание AR16

Отзывы:

Бренды по названию

Популярные бренды