INSTRUCTIONAL
OWNER’S MANUAL
3
MAIN CABIN FRAME AND ASSEMBLY
STEP 1:
STEP 2:
WARNING!:
You must make certain the frame is locked before using the trailer. Failure to do so could result in serious injury to
you or your child.
Remove trailer and all components from carton. Unfold
trailer frame and remove all components from inside
(Fig 1).
FIGURE 1.
FIGURE 2.
FIGURE A
NOTE:
Remove the trailer, wheels, hitch arm and jogger kit
from the box. Set the jogger kit aside, as you will
install this later. Lay the trailer on the ground with
the black fabric side down.
Position the frame with handlebar up as above, Lift from the side holding by the handlebar and
the front lower frame into an upright position (Fig 2 When locking, you will hear an audible “click”
to indicate the mechanism is engaged. Keep fingers away from locking assembly during opening
or folding to avoid injury. After assembly, push down on the handlebar to make sure the folding
latch is locked
