INSTRUCTIONAL
OWNER’S MANUAL
6
SECURING CHILD WITH 5-POINT SAFETY HARNESS
WARNING!
To avoid serious injury, children should always wear the seat belt, shoulder strap, and a helmet!
STEP 1:
STEP 1:
STEP 2:
NOTE:
NOTE:
STEP 2:
Undo the lap belt buckle and seat the child in the CENTER of the trailer.
Buckle the lap belt [A] over the child’s lap, and pull the strap until the belt is tight.
Undo the lap belt buckle and seat the children in the Left & Right seats of the
trailer. Buckle the lap belt [A] over each child’s lap, and pull the strap until
the belt is tight.
FOR ONE CHILD:
ONE CHILD:
TWO CHILDREN:
FOR TWO CHILDREN:
Place the two center shoulder straps [C] over the child’s shoulders, and
clip both straps into “D” Ring [D] of the center crotch strap. Adjust shoul-
der strap height of the child, then pull the straps until they are snug.
Clip the outer shoulder strap on either side into the “D” Ring of the outer
crotch strap directly below. This will keep the straps that are not in use out of
the way.
Place the two center shoulder straps [B] over each child’s shoulders, and clip
both straps into “D” Ring [C] of the center crotch strap. Adjust shoulder strap
height of the straps until they are snug - you should be able to fit two average
adult fingers between the belt and the child.
The buckle should be centered in your child’s abdomen. Hook the shoulder
straps to the D-rings on the buckle and adjust the ladder locks so they fit snugly.
WARNING!:
Adjust the straps so that the crotch strap and shoulder straps meet at the child’s stomach level,
NOT at the chest level!
STEP 2:
STEP 3:
STEP 4:
STEP 1:
Remove QR Snap from hitch connection
Remove Safety strap by releasing D-Ring
Pull trailer arm away from black hitch
Black Hitch attached to axle can remain on the bicycle for easy reattachment of the trailer.
REMOVAL OF TRAILER
TRAILER MAINTENANCE
Your trailer will give you many years of service with minimal care. To ensure safe and dependable operation, we recommend
the following regular maintenance. Before each ride:
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 1:
Make sure that wheels are fully secure on the frame. Wheels must be fully inserted to lock in place.
Check all fasteners to make sure that they are tight, and tighten or replace as needed.
Check tires for wear and proper inflation as listed on the tire sidewall. Use only hand-operated pump to avoid tire damage.
Under- or over inflation can result in unsafe handling.
Double check hitch attachment, making sure that QR Pin is locked, and that safety strap is in place.
Check harness strap for wear, and made sure that buckles lock properly.
ANNUALLY:
Once a year, or sooner if needed, have the trailer inspected by a qualified bicycle mechanic for signs of wear or needed adjustment.
AS NEEDED:
Trailer can be cleaned with a mild detergent and water. Do not remove seat or cover for washing. Do not use harsh chemicals or water,
as they may damage fabrics or the frame materials or surfaces.