background image

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or 

install the product.

• Do not  install the gazebo adjacent to trees or a sloped roof. Snow and ice may

slide onto the gazebo and cause it to collapse.

• Do not hang any weights on the roof frame.

• Keep all flame and heat sources away from the tent fabric. This tent is made

with fabric that meets CPAI-84 specifications for flame resistance. It is not fire

proof. The fabric will burn if left in continuous contact with any flame source.

The application of any foreign substance to the tent fabric may render the

flame-resistant properties ineffective.

• Keep all children and pets away from assembly area. Children and pets should

be supervised while gazebo is being assembled.

• The assembled gazebo should be located at least 6 feet from any obstruction

such as fence, garage, house, overhanging branches, laundry lines or electrical

wires.

• Some parts may contain sharp edges. Wear protective gloves if necessary during

assembly.

• This unit is heavy. Do not assemble this item alone. Make sure there is sufficient

manpower for safe assembly or moving the gazebo.

• Check all nuts and bolts periodically for tightness and when required, tighten

them again.

• While this gazebo is manufactured to withstand winds through only the supplied

ground stakes, in areas subject to frequent severe weather, securing the gazebo

to a deck, concrete patio or footings should be considered.

• Do not use or enter the gazebo during harsh weather (e.g. thunderstorms,

high winds, hail, heavy snow, etc). In these conditions, it might tip over and

could cause serious injury to bystanders. Any damage or injury caused by

which is not covered by the warranty.

• Do not use or enter the gazebo if there exists any of the following or similar

conditions:

1. Visible movement of support members, roofing panels or sagging roofline.

2. Creaks or audible noise from the gazebo.

3. Cracks, fractures or malformation of support members or roof panels.

4. Damaged or missing fasteners.

• Do not use a ladder leaning against the gazebo or climb onto the roof.

WARNING

4

CAUTION

Содержание A102006002





















Отзывы: