9
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
4. Use the two mounting bracket screws (RR) to attach
the mounting bracket (FF) to the outlet box (sold
separately).
Note:
Ensure two mounting bracket tabs
are parallel to the horizon.
Hardware Used
FF
Mounting
Bracket
x 1
Mounting
Bracket Screw
x 2
5. Loosen the ground screw preassembled to the
mounting bracket (FF). Wrap the green/bare (ground)
supply wire from the outlet box around the ground
screw. Tighten the ground screw to secure the ground
wire.
6. To remove the power cord (G) from the fixture (A),
locate the two wires extending from the power
cord (G). Lift the lever on the wire connectors
preassembled to the fixture wires to release each
plug wire. Once both wires of the power cord (G) are
released, pull it through the grommet (I) at the bottom
of the fixture (A) to remove.
4
6
RR
FF
FF
5
Ground Screw
Ground Wire
Outlet
Box
Tab
Lever
A
G
I
RR
